Make interesting Light panel with Broken Display.

I got a Broken Display. And I m thinking what should I do with a broken display. So Then my brain wakes up and said "behind the display there is a small leds " Then i Got an Idea Making a Light Panel which works on 5.0v in any USB ports.


For Building A light Panel with broken display. You will need A broken LCD display Any size.
Wires and USB male jack.



So now the Display has to be removed from the Housing or case whatever is it. Very carefully don't damage the LEDs. Only the things need is that the white Panel.

Here is the white focusing panel, which focus the lights from leds to the LCD to bright ups.

In this panel leds are in series connection.

And its take more voltage to lights up, so for that it have to broke down the series connection.

In between two leds by pointing Sharp Knife with some force cut off the connection.

 

Here after breaking the series connection. 

I am making Parallel connection with thin copper wire. As you can see in the Picture.

As you can see in the Picture Parallel connection to the leds. And Carefully do that Cause it is very small leds, Take time and do that.

 

Soldering Main wire to the leds Positive + connection And Ground - connection.

For covering leds I am Using this Sticker type which was stick to the Touch pad of this screen, or you can use any types of stickers.

After cutting the stickers. And stick to the top of leds And secure with stickey tape All the Sides

As i have done this type of connection. With two resistor. To limit the voltage

Instead of Two resistor you can use one 4.7ohm resistor.

After soldering resistor, And put back to usb Housing. Its done.

 now You can plug these to Your Power Bank , Charging Socket , Or any other Usb Ports. Its will work.

Here visit Youtube to watch This video - https://youtu.be/BSZgjX-ZWYo

Visit forums For this Post - http://www.diytechfactory.com/p/diy-techfactory-forums.html?place=msg%2FdiytechFactory%2FHtu8slThMTY%2F9auh5DzQBgAJ